Cloning ECUs
and TCUs
1 to 1
Cloning:
1. Create a full backup of the old ECU/TCU.
2. Transfer the data from the full backup 1 to 1 to the new device.
3. For safety reasons, a full backup of the new device must also be created.
Not
1 to 1:
1. Full backups of both devices are required.
2. These full backups must be sent to support for processing.
If "No Clone"
stands:
1. In this case, the ECU/TCU cannot be cloned.
2. An alternative solution or approach must be considered.
| wdt_ID | BRAND | ECU / TCU | CLONING TYPE | WORKING MODE | IMMO | VIRGIN | UNIT TYPE | DATALOGGER | SW LICENSE |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ALFA ROMEO | MM10JA | 1 TO 1 | BENCH - BOOT | NO | NO | TCU | NO | FLS0.1 OR FLS0.4 OR FLS0.5 |
| 2 | ALL BIKE | M17.8.7 | 1 TO 1 | BENCH - BOOT | NO | NO | ECU | NO | FLS0.1 OR FLS0.10 OR FLS0.13 OR FLS0.5 |
| 3 | ALL BRAND | 6HP | 1 TO 1 | BENCH | NO | Only Exx Series | TCU | NO | FLS0.2 OR FLS0.5 |
| 4 | ALL BRAND | 8HP | 1 TO 1 | BENCH | NO | ONLY Fxx Series | ECU | NO | FLS0.2 OR FLS0.5 |
| 5 | ALL BRAND | EDC17C49 | 1 TO 1 | BENCH - BOOT | NO | NO | ECU | NO | FLS0.1 OR FLS0.10 OR FLS0.5 |
| 6 | ALL BRAND | EDC17C53 | 1 TO 1 | BENCH - BOOT | NO | NO | ECU | NO | FLS0.1 OR FLS0.10 OR FLS0.5 |
| 7 | ALL BRAND | EDC17CV41 | 1 TO 1 | BENCH - BOOT | NO | NO | ECU | NO | FLS0.1 OR FLS0.10 OR FLS0.5 |
| 8 | ALL BRAND | EDC17CV52 | 1 TO 1 | BENCH - BOOT | NO | NO | ECU | NO | FLS0.1 OR FLS0.10 OR FLS0.5 |
| 9 | ALL BRAND | EDC17CV54 | 1 TO 1 | BENCH - BOOT | NO | NO | ECU | NO | FLS0.1 OR FLS0.10 OR FLS0.5 |
| 10 | ALL BRAND | EDC7C1 | 1 TO 1 | BENCH | EEPROM | EEPROM | ECU | NO | FLS0.1 OR FLS0.5 |
